Craftex CX404 Manuel d'utilisateur télécharger pdf (Page 8)

8

PROPER GROUNDING

Grounding provides a path of least

resistance for electric current to reduce the

risk of electric shock.

CX404 is for use on a normal 110 volt

circuit. Make sure that the machine is

connected to an outlet having the same

configuration as the plug. If an adaptor plug

is used, it must be attached to the metal

screw of the receptacle. To prevent

electrical hazards, have a qualified

electrician ensure that the line is properly

wired.

The dust collector should be wired with a

plug having 3 prongs to fit a 3 prong

grounded receptacle as shown in figure-2.

Do not remove the grounding prong to fit it

into a 2 pronged outlet.

Figure-2 110-Volts outlet for CX404

It is strongly recommended not to use

extension cords with your CX404. Always

try to position your machine close to the

power source so that you do not need to

use extension cords.

In case if you really find it necessary to use

an extension cord, make sure the extension

cord does not exceed 50-feet in length and

the cord is 14-gauge to prevent motor

damage.

WARNING

Improper connection of the equipment-

grounding conductor can result in a risk

of electric shock. Check with a qualified

electrician if you are in doubt as to

whether the outlet is properly grounded.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Commentaires sur ces manuels

Pas de commentaire